International standard raw material of saws we use is also produced at international level with minimum error from heat treatments to balance in our factory thanks to state-of-art technology. Useful practices to minimize user errors and obtain high efficiency from our products are for the benefit of user.

1.Saw tooth is non-warrantable in our country like other countries manufacturing saws in the world.

2.Balance of machine shaft and whether or not bearing is faulty should be checked before the saw is installed on machine. Malfunctioned bearing causes machine to have unusual noises and saw to turn in a balanced manner.

3.Whether or not surface of connecting flanges has oxidation and blurring should be checked. If any, they should be removed. Otherwise, balancing of saw deteriorate.

4.Shaft can be deformed due to oxidation; therefore, a cavity can form at connecting point between shaft and saw, which causes to deteriorate front balance of the saw. Saw having corrupted front balance breaks teeth while entering the material.

5.Dimensions of connecting flanges should be standard; otherwise, balance of the saw can deteriorate, which shakes the machine and enforces the operation.

6.Slowly touch the material to be cut to the saw without decreasing engine speed. Please use lubricant during cutting process.

7.Make well-arrangement for the process according to size and thickness of the material to be cut.

8.Cutting burr of the saw on the material should not exceed 1.5 mm.

9.In the event that the saw has difficulty to cut, is stuck or overheats, the saw should be sharpened. Keep the original form of teeth during process of sharpening.

10.Physical life of the saw, which is frequently sharpened, extends.

11.Do not use saw with missing teeth.